Cladco Metal PVC Plastiol Coated Ridge Flashing 150 x 150mm x 3000mm

Ridge flashings are used to connect the two sides of the roof at the peak. Cladco's ridge flashings are folded to a 130-degree internal angle and can flex 10 - 15 degrees in either direction, depending on the angle of your roof.

Ridges are an important part of any profiled clad apex roof, and because they come in a variety of colours and finishes to match our roof sheets, they will complement the look of any structure.

Roof edge flashing ridges include a safety welt on the edge to strengthen the material's strength and come in a standard 3m length. Remember to provide a minimum of 200mm overlap between each ridge piece when installing the ridge flashings. Ridge pieces lay on top of the roofing sheets and are stitched to the sheet below with st22 sewing screws to keep them in place.

Please note: The 150 x 150 flashings give a coverage of 142 x 142 due to the 8mm welt.