Cladco Metal PVC Plastiol Coated Ridge Flashing 200mm x 200mm x 3000mm

Cladco Roof Ridge cap pieces are used to connect the two sides of the roof at the peak. They're folded to a 130-degree internal angle and can flex 10 – 15 degrees either direction, depending on your roof's angle.

Ridges are an important part of any profiled clad apex roof, and PVC ridge caps, which come in a variety of colours and finishes to match our roof sheets, will improve the appearance of any structure. Roof ridge caps come equipped with a safety welt on the edge to strengthen the material's strength, and they come in a 3m length.

Remember to leave a minimum of 100mm overlap between each roof ridge cap piece when installing the PVC ridge caps. Roof ridge cap pieces lie on top of the roofing sheets and are stitched to the sheet below with st22 sewing screws to keep them in place. They're meant to be used where two sides of your roof meet at the pinnacle.

Roof ridge caps are an essential component of any profiled clad construction, and the variety of styles and colours available can improve the appearance of any structure. A safety welt is included on our PVC ridge caps to strengthen the material's robustness.

Please note: The 200 x 200 flashings give a coverage of 192 x 192 due to the 8mm welt.